Quality Water Pressure Tanks & Repair Services

Well systems use well pumps that are capable of pumping large amounts of water to the appliances throughout your house. However, with frequent use and from rapidly and unnecessarily turning on and off, well pumps can fail prematurely. By using a pressure tank, water can be used leisurely over long periods of time with the pump then running for a short amount of time to fill the tank again.

Residential & Commercial Water Pressure Tank Service
for the Austin & Surrounding Areas

Aqua Pump and Well Service can provide service, installation, and repairs for water pressure tanks of all kinds. We will also happily recommend the best water pressure tank for your well system.

The way a pressure tank functions is simple, there are 2 chambers – one with air and one with a diaphragm that holds the water. The 2 chambers are separated, and kept under pressure to allow water to be distributed on demand, when the pump is engaged the tank is refilled with water.

Emergency Well Service & Pump Repair

Call Today:  512-264-0060

When it comes to water pressure tanks Aqua Pump and Well Service offers:

  • Above ground water pressure tanks
  • Bladder style water pressure tanks
  • Diagnostic testing for water pressure tanks
  • Diaphragm style water pressure tanks
  • Expert water pressure tank service and repairs
  • Fast installation
  • Water pressure tanks with up to100 PSI max working pressure

When a pump turns on, it’s absolutely crucial that your water pressure tank is in good working order. Without a properly functioning pressure tank, the electric pump in your well frequently starts and stops. This overuse can burn and damage the motor’s components, risking pump failure and the costly repairs that follow.

Our experts at Aqua Pump and Well Service provide service and installation for water pressure tanks of all sizes. For more information or for an estimate, please don’t hesitate to contact us.


Instructions for checking the air charge in your tank (normal well system – not storage tank system)

  1. Turn off the power to the pump.
  2. Open hose bib closest to the pressure tank and drain pressure tank.
  3. When the tank is empty check the air charge on the top of the tank. The air charge should be 2 psi less than what the pump is set to turn on at. If you have a pump saver we recommend it be 2-3 psi lower than what the pump turns on at because the pump saver has a 3 second delay.

Aqua Pump and Well Service Inc. is Licensed by the Texas Department of Licensing and Regulations P.O. Box 12157 Austin, TX 78711. (1-800-803-9202).
Aqua Pump and Well Service, Inc is operating under License # 58523 KP